Barrier-free RFID gate, transparent PMMA enclosure, 13.56 Mhz, 0.9 meter gate width, infrared sensor, EAS, AFI bits detection, TCP/IP, RS485/ 232 communication, ISO15693 protocol compliance
Download Specification
GEE-RG-428 is a type of Barrier-free RFID security gate, with ISO15693 Middle range RFID reader embedded. Made of transparent PMMA enclosure, with 0.9 meter read range, 4 pair infrared sensor, EAS, AFI bits detection, TCP/IP, RS485/ 232 communication, it is widely used in asset tracking, access control and other high-traffic locations, for example, Libraries, schools, conference, exhibition fairs.
Main features:
• 1660 mm * 557 mm *120 mm, transparent PMMA material
• Fully support of IEC/ISO15693 protocol, NXP, EM, TI, EM supported
• 13.56 Mhz, typical 0.9 meter gate width
• infrared sensor with sound and light alarm
• EAS, AFI bit detection, effectively reduce asset loss
• TCP/ IP, RS485/ RS232 communication
• CE, RHOS compliance
Main features | ¡¡ |
Size | 1660 * 557* 120 mm |
Material | Acrylic + Aluminum + sheet metal |
Power supply | 100- 240V, 50- 60 Hz |
Power consumption | max 25W |
Weight | 40 kg/pcs |
Protocol | ISO15693, ISO18000-3 |
RF | ¡¡ |
Frequency | 13.56 Mhz |
Supported card | NXP ICODE SLI series, Tag-it HF-I plus, ST.. |
RF power | 1- 8 W |
Typical Gate width | 90 cm |
Antenna | 3D antenna |
Identification rate | 50 tags/ second |
EAS mode | EAS, AFI, EAS+AFI |
Communication interface | TCP/ IP, RS232, USB, WIFI |
Interaction port | 4 way relay out, 2 way MOS out |
Infrared sensor | built-in |
Alarm & Buzzer | built-in |
Others | ¡¡ |
Tag identification | Tag inventory, 3D directions detection, AFI bit detection |
Alarm | Sound and light alarm when illegal pass, tailing |
Statistics | person & book in/ out statistics |
Software | ¡¡ |
SDK | provide API, Demo software and source code |
Environment | ¡¡ |
Working Temperature | -25 ~ +60 Degree Celsius |
Storage Temperature | -40 ~ +85 Degree Celsius |
Relative humidity | 5- 95% RH, no condensation |
In transportation and ticketing feild, the traditional payment is by a simple paper ticket that bears some of security features, like florescent ink, security line, latent image, barcode, infra-red ink. Through it can be prevent most of the fake tickets, however hard work load, low identification rate, and relevant unsafe features enforce institutions had to recruit abundant workforce to maintain normally operation, and now everything was changed as RFID technology deeply implanted into this sector.
At most of bus station or subway station, you will not no longer find any paper tickets any more, which replaced them was a simple recharge card or NFC mobile phones. And in recent years, the pace of changing speeds up dramatically.
Thanks to the RFID technology, you do need to wait in line for ticket checking, all just by a simple touch, and you are allowed to get through, and payment will automatically deducted by the RFID readers.
The benefits are not only in its convenience, but also its security. Each RFID card will have a unique ID, which is permanently stored in its ROM, and can not be rewritten. Meanwhile the communication between the RFID card and RFID readers is encrypted. Let’s take oyster card( London metro card) for example, this type of card is embedded with NXP Mifare Desfire chip, which the chip is integrated with the 3DES encryption technology, and still now there is zero case of password being cracked.
This RFID technology also have been applied into certain of big event, such as Olympics, World Expo…
In the future, we will see more and more case of this advanced RFID technology being applied in our normal life, and therefore change our life for ever.
Barrier-free RFID gate, advanced tranparent PMMA, IEC/ISO15693, 13.56 Mhz, 0.9 meter detection range, direction check, EAS, AFI check
D8 mm, FPC nfc, 13.56 Mhz, ntag213, UL, ICODE SLIX, F08, 15 mm read distance, IEC14443 A & ISO18092
Shop the GEENFC Online store ,visit GEENFC Amazon Store or Aliexpress store . For Wholesalers please Contact us by email or skype